12V Car Rear View Camera at https://www.carforaccessories.com/
The standard configuration:
Camera + 4 m video cable (or DVD video cable) + 1 m DC power cable + self-tapping silk
Features:
1. The CCD digital fill light image sensor is specially designed for the rear view of the car. It uses digital fill light and software technology to make the daytime image clear and the night low illumination.
2. Large viewing angle of 170°, safer reversing
3. -30 ° C to +60 ° C temperature range, fully in line with automotive environment applications.
4. With reversing reference line (electronic ruler line), the obstacle distance is clear at a glance
5. Digital sensor chip processing, night vision effect is obvious
6. Factory tested by high-pressure water immersion test and 12-hour power-on aging test, multi-layer waterproof design, truly high-pressure rinsing and immersion waterproof
7. Installed at the rear handle and license plate lights, with self-tapping screws
8. The video cable is connected to the monitor, and the power cable is connected to the power supply of the taillight of the car. When the vehicle is reversing, the reversing monitoring system automatically starts working, and the situation behind the car can be clearly seen .
Product parameters:
Image sensor: PC7070
Pixel: 756*720
Image format: NTSC/PAL
Diagonal viewing angle: 170 degrees
Rated voltage: DC12V
Protection level: IP67
Display size: 4.3 inches
Display format: 16:9 power ≤ 3W
Power: DC 6-32V
Video: All the way to reverse the rear view input, all the way to DVD input, rear view priority
Video input system: PAL/NTSC dual system automatic switching
Reverse function: automatic switching between rear view and automatic wake-up function after connecting the camera
The LCD monitor is small and convenient, the bracket can be moved up and down, and it can be adjusted according to the angle of view required by the customer. It can be made into a car monitor.
Video format: NTSCPAL automatic switching
Display: 4.3-inch TFT-LCD digital screen Resolution: 480 (H) X 272 (V)
Input voltage: DC6-32V
Signal input: two video inputs, one way back, one channel can be connected to DVD and other videos
Superhuman design, reversing automatic start, off-line self-power shutdown!
Precautions:
1. For the microelectronic products of this product, please install, operate and use according to relevant national standards.
2. Adapted to 12V automotive electrical systems, can not be installed in 24V electrical models.
3. For the continuity between the parts, please connect with the dedicated line provided immediately.
4. Care should be taken during installation to prevent flattening, puncture, cutting, and extension of each cable.
5. install and maintain the system when the power is off.
6. Daily maintenance and repairs are carried out by manufacturers or professionals.
7. This product is not connected to the car brakes and is only used for parking assistance. If there is a parking accident, the product manufacturer has no obligation to bear legal responsibility.
Ultra-easy installation method:
1. First wire the cable, red is connected to the positive pole of the power supply, and the negative pole is grounded.
2. Install the camera and place the camera in the trunk.
3. Plug in the camera and plug in the monitor
4. Connect the power supply
Easy to solve all your car installation problems in four easy steps
Buyer show
4.3inch 12V Car Rear View Camera Monitor Backup Reverse Camera Kit Night Vision Reversing Parking Rear View System New
Buy 4.3inch 12V Car Rear View Camera Monitor Backup Reverse Camera Kit Night Vision Reversing Parking Rear View System New at www.carforaccessories.com! Free shipping to 185 countries. 45 days money back guarantee.
I came in a fairly crumpled package, but I installed it myself, it works perfectly, it turns on without any risks and signals, the picture is worthy of minuses I can note this. Definitely recommend!!!
Packed well. The kit corresponds to the description. The camera displays mirror, it is only for the rear view, the backlight is bright, the consumption is only 230ma at 12 volts. Brightness and contrast settings are average. This version is without menu buttons. In general, it works. Be sure to heat shrink.
Received in good order. Was well packed and shipped quickly and delivered.
It works very well, thank you
For the price, excellent product easy to install works well for now, beware the whole rear camera and quite fragile well protect it.
I want to return the product, it has arrived with the striped screen, no screen protection, messy monitor cable, out of the bag and no seal in the box. Looks like she's been manipulated before.
Fast delivery, conform to the description, test with 12v power supply ok.
All OK
Is still pre-install
6 days to Yekaterinburg, everything is whole, works, image quality norms, marking is